Showing 65–80 of 112 results
-
$353.00
Suggested Additional Purchase: Part # PBI-291 (Lock Nut)Features & Benefits:-* 32 Tooth Pulley Stock Replacement* Long Life Steel* Replaces OEM # 35000152Proudly Manufactured in the USA by Andrew Products
-
$353.00
Suggested Additional Purchase: Part # PBI-291 (Lock Nut)Features & Benefits:-* 31 Tooth Power Pulley gives 3% more RPM* Speedo Recalibration Unit NMZ-NSIM-01 is available if required.* Long Life SteelTech Tips:- * Pulleys with less teeth than stock, rear axle must be adjusted back. * Each tooth change on transmission sprocket = + /– .125 inch…
-
$95.00
* Shift clutch (1-2 clutch) Replaces OEM 35665-36* Replacement clutches are specially heat treated and shot peened for super durability.
-
$463.00
Features & Beneifts:-* Chrome-Moly EZ-install pushrods.Tech Tips:-* EZ-install pushrods can be installed without removing gas tanks or rocker boxes. * Prior to Start-up, the engine should be wound over with spark plugs removed until oil reaches the top pushrod ball / rocker arm socket.Proudly Made in the USA by Andrews Products !
-
$195.00
Features & Benefits:-* Stock 3rd Gear mainshaft & 2nd Gear countershaft* OEM 35772-89 28T* Must be used in conjunction with matching Andrews gear AP-299102* Made from high nickel alloy steel. * Heat treated and shot-peened to give maximum durability & strength. * Lead-in ramps improve shifting and reduce wear on drive dogs & slots.Tech Tips:-*…
-
$195.00
Features & Benefits:-* Stock 2nd Gear mainshaft & Stock 3rd Gear countershaft* OEM 35771-89 24T* Must be used in conjunction with matching Andrews gear AP-299103* Made from high nickel alloy steel. * Heat treated and shot-peened to give maximum durability & strength. * Lead-in ramps improve shifting and reduce wear on drive dogs & slots.Tech…
-
$541.00
Close ratio 3rd gear set (1.35 ratio) (18Tx23T)* Transmissions built after mid 1976, to serial U-8959 (or higher) with caged needle bearings.* New design drive slots include lead in ramps for quicker, more positive shifting (same as stock 3rd and 4th gears).* With Andrews 4 speed gears, transmissions last longer, shift faster, and just plain…
-
$410.00
Features & Benefits:-* 2.61 Close ratio first gear set (2 pieces , 20T & 30T)* Provides true close ratio shifting into 2nd. * 10 kph of usable 1st gear. * 2.61 close ratio 1st gear compares to 2.78 stock 1st gear ratio * Made from high nickel alloy steel. * Heat treated and shot-peened to…
-
$284.00
* 16T x 20T mainshaft 1st gear cluster with a 24T countershaft 1st gear.* Installation in ’80-86 4spBT requires purchase of a 21 tooth countershaft(1.82 ratio) 2nd gear AP-202160.* 2.60 Ratio works best with Electra glides and heavier bikes with motor or trans sprockets having more teeth than stock sprockets. * With Andrews 4 speed…
-
$284.00
* 17T x 20T mainshaft 1st gear cluster with a 24T countershaft 1st gear.* Installation in 1980-86 4sp Big Twin requires purchase of a 21 tooth countershaft 2nd gear AP-202160.* Best choice for Superglides, choppers and lighter bikes. This is a no clunk 48 mph, 1st gear. * With Andrews 4 speed gears, transmissions last…
-
$704.00
Fits: Alternator Iron head, and 4spd Evolution Sportster. * XL main drive C-Ratio gear set – Mid 1984-1990 (26T & 18T)* Andrews 4 speed Sportster gears are made from high nickel alloy steel which is heat treated and shot peened for maximum durability. Shot peening greatly improves the wear resistance of drive edges and slots….
-
$2,358.00
Tranmsmission Gear Kit includes:2 x First Gear (2.94 ratio) – Mainshaft & Countershaft 2 x Second gear – Mainshaft & Countershaft 2 x Third gear – Mainshaft & Countershaft 2 x Fourth gear – Mainshaft & Countershaft 2 x Fifth gear – Mainshaft & Countershaft 1 x Countershaft 1 x Mainshaft * Andrews Products 5speed…
-
$1,570.00
Gear Kit * Includes all 6 gears, 2 shift clutches and 2 forks. * Shafts and small parts kits must be ordered separately.* Andrews 4 speed gears, transmissions last longer, shift faster, and just plain run better.Tech Tips:-* 1st Ratio = 2.44 – 3rd Ratio = 1.35.
-
$294.00
* OEM 35700-36 (loose rollars)* Replacements for stock countershaft 3rd gear cluster. * With Andrews 4 speed gears, transmissions last longer, shift faster, and just plain run better.
-
$410.00
* Stock main drive gear(Chain Drive) * OEM 35029-79* Must be used in conjunction with matching Andrews gear AP-296555* Andrews Productsspeed gears are made from high nickel alloy and heat treated and shot-peened to give maximum durability and strength. Also,where applicable, lead-in ramps have been machined into most gears to improve shifting and reduce wear…
-
$357.00
Stock main drive gear (4TH) 26 Teeth.* (1977-1986) (caged rollar) OEM 35067-77 & OEM 35067-84* Replacement 4th gears are made with wider drive slots and steeper lead-in ramps for more positive 3-4 shifting. * The in.Oin. ring groove is a design update for all chain drive 4th gears from 1977 through 1986.
Showing 65–80 of 112 results