Showing 33–48 of 112 results
-
$353.00
Requires the purchase of:BAI-D26-0205 – Trans Nut Lock Plate Kit; BT’92-06& XL’91upJGI-12067-A – Seal; Trans Main BT’L94-06 5spd Models Only (Each)BCM-7342 – Main Drive Seal Spacer; BT’L94up 5spdFeatures & Benefits:-* 32 Tooth Pulley Stock Replacement* Speedo Recalibration Unit DAK-SIM-1A is available if required.* Long Life Steel* Replaces OEM # 40210-85 # 40250-94Tech Tips:-* Fits 1986-2006…
-
$353.00
Requires the purchase of:BAI-D26-0205 – Trans Nut Lock Plate Kit; BT’92-06& XL’91upJGI-12067-A – Seal; Trans Main BT’L94-06 5spd Models Only (Each)BCM-7342 – Main Drive Seal Spacer; BT’L94up 5spdFeatures & Benefits:-* 30 Tooth Power Pulley gives 6.4% more RPM (200 RPM increase @ 60 MPH, high gear)* Speedo Recalibration Unit DAK-SIM-1A is available if required.* Long…
-
$32.00
* Replaces OEM Shift Fork # 34158-36* One piece cold forged forks. Fully heat treated and black oxide coated, a must for all transmission rebuilds.
-
$32.00
* Replaces OEM Shift Fork #34159-36* One piece cold forged forks. Fully heat treated and black oxide coated, a must for all transmission rebuilds.
-
$95.00
* Shift clutch (3-4 clutch) Replaces OEM 35440-38* Replacement clutches are specially heat treated and shot peened for super durability. * 3-4 clutches are face milled and have longer lead in ramps for more positive shifts.
-
$163.00
* Stock 2nd gear mainshaft / 3rd gear countershaft* OEM 35026-79A* Must be used in conjunction with matching Andrews gear AP-296330* Andrews Products 5speed gears are made from high nickel alloy and heat treated and shot-peened to give maximum durability and strength. Also,where applicable, lead-in ramps have been machined into most gears to improve shifting…
-
$163.00
* Stock 2nd gear countershaft / 3rd gear mainshaft * OEM 35027-79A* Must be used in conjunction with matching Andrews gear AP-296220* Andrews Products 5speed gears are made from high nickel alloy and heat treated and shot-peened to give maximum durability and strength. Also,where applicable, lead-in ramps have been machined into most gears to improve…
-
$363.00
2.94 Close ratio first gear set (2 pieces)* 2.94 1st gears provide close ratio shifting into 2nd. At peak RPM, 2.94 gears will run +5 mph over 3.24 ratio.Features & Benefits:-* Made from high nickel alloy, heat treated & shot-peened to give maximum durability and strength. * Lead-in ramps machined into most gears, improve shifting…
-
$2,573.00
Features & Benefits:-* Kit includes 1st, 2nd, 3rd, 4th, 5th gears, mainshaft and countershaft. * Made from high nickel alloy steel. * Heat treated and shot-peened to give maximum durability & strength. * Lead-in ramps improve shifting and reduce wear on drive dogs & slots.Tech Tips:-* 2004 & later Sportsters cannot use the 1991-2003 gears
-
$1,570.00
Gear Kit * Includes all 6 gears, 2 shift clutches and 2 forks. * Shafts and small parts kits must be ordered separately.(early c/s required… uses stock loose rollers oem#9084 = rollers need to be sourced separate)* Andrews 4 speed gears, transmissions last longer, shift faster, and just plain run better.Tech Tips:-* 1st Ratio =…
-
$111.00
Features & Benefits:-* Stock Countershaft 5th Gear * OEM 35633-89 (19T)* Must be used in conjunction with matching Andrews gear AP-299105* Made from high nickel alloy steel. * Heat treated and shot-peened to give maximum durability & strength. * Lead-in ramps improve shifting and reduce wear on drive dogs & slots.Tech Tips:-* 2004 & later…
-
$410.00
* Stock main drive gear (Belt Drive)* OEM 35029-85* Must be used in conjunction with matching Andrews gear AP-296555* Andrews Products 5speed gears are made from high nickel alloy and heat treated and shot-peened to give maximum durability and strength. Also,where applicable, lead-in ramps have been machined into most gears to improve shifting and reduce…
-
$147.00
Features & Benefits:-* Made from high nickel alloy, heat treated & shot-peened to give maximum durability and strength. * Lead-in ramps machined into most gears, improve shifting & reduce wear on drive dogs & slots.Tech Tips:- * Due to Factory HD changes in Gear Teeth pitch over the years , Gears must be changed in…
-
$95.00
* Stock 4th gear countershaft* OEM 35625-79A* Must be used in conjunction with matching Andrews gear AP-292445(1987-up); also replaces gear/spacer in all earlier 5 speeds.* * Andrews Products 5speed gears are made from high nickel alloy and heat treated and shot-peened to give maximum durability and strength. Also,where applicable, lead-in ramps have been machined into…
-
$357.00
Stock main drive gear (4TH) 26 Teeth.* (1936-1976) loose rollars OEM 35065-65* Replacement 4th gears are made with wider drive slots and steeper lead-in ramps for more positive 3-4 shifting.
-
$163.00
* Stock mainshaft 3rd (1.23 Ratio) (24T)* OEM 35306-59* Replacements for stock mainshaft 3rd. The design of drive slots on mainshaft gear has been upgraded to include lead-in ramps for quicker, more positive shifting.* With Andrews 4 speed gears, transmissions last longer, shift faster, and just plain run better.
Showing 33–48 of 112 results