Showing 1–16 of 51 results
-
$1,623.00
Features & Benefits:-* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector* Hand tig welded from top to bottom* Machined stainless steel header collars* 18mm o2 bungs with 12mm adapters,…
-
$2,165.00
Features & Benefits:-* 4.5in. high flow performance rolled cone muffler with stepped baffle from 2 ¼ to 2 ½ inches. Increases bottom to mid-range torque and horsepower on all motors. Tuned properly can accommodate 88in. to 143in..* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector* Hand tig…
-
$1,999.00
Refined from four decades of racing competition, the Vance & Hines Stainless 2-into-1 Upsweep looks the part and does not disappoint, featuring gorgeous hand TIG-welds on lightweight high-grade stainless steel and a brushed in.worksin. finish. * Lightweight High Grade 304 Stainless Steel Construction* Hand TIG WeldedSuggested Additional Purchase:-* Exhaust Gaskets # CG-C9719-2Tech Tips:-* Fits with…
-
$1,949.00
Features & Benefits:-* Meticulously handmade from high-quality 16GA stainless steel, mandrel bent then gas purged and TIG welded.* Includes custom heat shields with wire tied fasteners for a race inspired look.* Ceramic Black with stainless heat shields with wired tied fasteners for a race-inspired look.* One of the best performing Harley exhausts on the market….
-
$1,876.00
Features & Benefits:-* Triple stepped headers 1 .75in. to 1.875in. to 2.00in. * Equipped with a 2in. step baffle 2.5in. to 3in. * System equals five steps throughout for extreme power gains.* Header flows into a mini-cone to create a deep, rich and throaty sound.* System reduces heat concentration by up to 30%.* Full-coverage one-piece…
-
$1,876.00
Features & Benefits:-* Triple stepped headers 1 .75in. to 1.875in. to 2.00in. * Equipped with a 2in. step baffle 2.5in. to 3in. * System equals five steps throughout for extreme power gains.* Header flows into a mini-cone to create a deep, rich and throaty sound.* System reduces heat concentration by up to 30%.* Full-coverage one-piece…
-
$1,949.00
Features & Benefits:-* Meticulously handmade from high-quality 16GA stainless steel, mandrel bent then gas purged and TIG welded.* Includes custom heat shields with wire tied fasteners for a race inspired look.* Ceramic Black with stainless heat shields with wired tied fasteners for a race-inspired look.* One of the best performing Harley exhausts on the market….
-
$1,638.00
Comp-S 2-1 Features:* Dyno tuned for maximum performance* Swept-up muffler for enhanced ground clearance.* Carbon fiber end cap.* Mandrel bent stainless steel tubing.* All TIG welds done by hand.* High-temp SS wool and packing material.* Fits with forward and mid controls.* Available in brushed stainless finish.* Accepts stock O2 sensor, as well as aftermarket wide…
-
$1,623.00
Features & Benefits:-* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector* Hand tig welded from top to bottom* Machined stainless steel header collars* 18mm o2 bungs with 12mm adapters,…
-
$2,194.00
Features & Benefits:-* Supplied with Perforated Wrapped Baffle.* Stepped Header System for Increased Torque & Horsepower.* Each Exhaust Configuration is Designed & Dyno Tested at D&D.* Upswept Muffler for Increased Ground Clearance. * Includes Heat Shields & Bolt Kit. * Works with 12mm & 18mm O2 Sensors.* Includes Small D&D Tag on the Muffler.* Deep…
-
$1,842.00
Comp-S 2-1 Features:* Dyno tuned for maximum performance* Swept-up muffler for enhanced ground clearance.* Carbon fiber end cap.* Mandrel bent stainless steel tubing.* All TIG welds done by hand.* High-temp SS wool and packing material.* Fits with forward and mid controls.* Available in ceramic black.* Accepts stock O2 sensor, as well as aftermarket wide band…
-
$1,842.00
Features & Benefits:-* Dyno tuned for maximum performance.* Swept-up muffler for enhanced ground clearance.* Black Billet Turnout end cap.* Mandrel bent stainless steel tubing.* All TIG welds done by hand.* High-temp SS wool and packing material.* Fits with forward and mid controls.* Available in ceramic black.* Accepts stock O2 sensor, as well as aftermarket wide…
-
$1,490.00
Fitment Details:-* Fits Dyna 2006-2017. (NOTE!!!!2006-11 require drilling and tapping for 12
-
$1,623.00
Features & Benefits:-* 4in. rolled cone muffler with a 2 ¼ coiled perforated baffle for increased torque and a deep tone* 065 stainless steel headers stepped from 1 ¾in. to 1 7/8in. to 2in. at the collector* CNC billet aluminium endcap* Hand tig welded from top to bottom* Machined stainless steel header collars* 18mm o2…
-
$2,868.00
Features & Benefits:-Designed with performance and additional ground clearance in mind while offering a custom look and a powerful sound. These Big Inch pipes are the go-to for motors 110ci and larger. All pipes are made with mandrel bent, aircraft quality 304 Stainless Steel featuring a hand-formed merge collector that allows for precise flow performance.*…
-
$1,638.00
Features:* Works with Aftermarket forwards / and all mid controls* Dyno tuned for maximum performance.* Swept-up muffler for enhanced ground clearance.* Carbon fiber end cap.* Mandrel bent stainless steel tubing.* All TIG welds done by hand.* High-temp SS wool packing material.* Available in brush stainless finish.* Simple, clean, and functional heat shields included.* Drops weight.*…
Showing 1–16 of 51 results