Showing 49–64 of 112 results
-
$156.00
Features & Benefits:-* Dual Fire High Output Andrews Super Volt Coil delivers 30,000+ volts. * 2.8 Ohms for 1985-99 Evolution engines with electronic Ign* Also fits 1970-1984 HD converted to Dual Fire electronic Ignition* Coils will produce more voltage than stock coils.* Replaces OEM # 31614-83, 31620-88Tech Tips:-* Does Not fit EFI models !Proudly Made…
-
$378.00
Features & Benefits:-* Upgraded EV57, fast ramps for modified 80 to 88 inch motors. * Very broad power band; 6000 RPM. * Designed for use with High Lift Springs & collars. # AV-VSK600S* High performance hydraulic lifters are recomendedSuggested Additional Purchase:Adjustable Pushrod Kit: # SS930-0052 or # AP-292245Lifters: # FE-4061 or # SS33-5352Cam Change Gasket…
-
$378.00
Features & Benefits:-* Bolt-in performance cam; state of the art ramp design. Longer duration than EV3 but higher static comp. pressure; wide torque band; 2600 to 6000+ RPM.* Works with stock valve springsSuggested Additional Purchase:Adjustable Pushrod Kit: # SS930-0052 or # AP-292245Lifters: # FE-4061 or # SS33-5352Cam Change Gasket Kit: 1970-1992 # JGI-25225-70-KX or 1993-1999…
-
$378.00
* Street/drags: More mid-range and high end power, smooth idle. Best cam for modified 74in./80in. and small strokers. Spring spacing required.* If you are installing cams in a shovel engine, the Andrews valve spring collars and related parts will make things go a lot smoother. The Andrews springs and collars are designed for easy installation…
-
$378.00
Features & Benefits:-* You’ll get more mid-range and top-end power for your street or drag bike* These cams work with solid or hydraulic lifters, and the idle remains unaffected up to 6,000 rpm with stock valve springs.* AB GRIND CAMS have an A intake plus a long duration exhaust for cooler running and high-end power
-
$378.00
* More mid-range and hi end power. Idle un-affected. Head setup required 1980 & 1981 engines: The height of original stock H/D valve guides restricts spring travel (and cam lift) to .430 or less!* If you are installing cams in a shovel engine, the Andrews valve spring collars and related parts will make things go…
-
$801.00
* Bolt in cam for 2004-2021 Sportsters* Best performance gains 3500-6500 rpm. * Compatible with stock valve springs.* Adjustable pushrods SS930-0023 are recommended.Tech Tips:-* Designed as a bolt-in cam set, but should always be validated by the Assembling Technician.
-
$711.00
* Designed with broad tip cams, for very strong, low RPM-mid range performance, great low end punch. Works great in the stock 103ci engine. Still works ok in a 96ci but likes a bit more compression like in the 103ci or even S&S 107ci Kit.* Great torque cam in the 103’s
-
$1,412.00
Bolt-in street cam with more torque and HP for all around riding with stock CR (1800–6500 RPM).Scout engines run DOHC, 4 valves, and a 10.7 compression ratio.
-
$541.00
Features & Benefits:-* Made from high nickel alloy* Heat treated and shot-peened to give maximum durability & strength. * Replaces OEM # 35042-79Tech Tips:-Length = 12.065in.
-
$447.00
Features & Benefits:-* made from high nickel alloy* heat treated and shot-peened to give maximum durability & strength. Oem:- 35036-84A
-
$468.00
Features & Benefits:-* made from high nickel alloy* heat treated and shot-peened to give maximum durability & strength. Oem:- 35640-89Tech Tips:-* 2004 & later Sportsters cannot use the 1991-2003 gears
-
$426.00
Features & Benefits:-* Made from high nickel alloy* Heat treated and shot-peened to give maximum durability & strength. * Replaces OEM # 35039-85
-
$541.00
Features & Benefits:-* Made from high nickel alloy* Heat treated and shot-peened to give maximum durability & strength. * Replaces OEM # 35042-90Tech Tips:-Length = 13.605in.
-
$353.00
NOTE: 34 Tooth Does not fit 2007–16 Touring Models!Suggested Additional Purchase: Part # PBI-291 (Lock Nut)Features & Benefits:-* 34 Tooth Overdrive Pulley gives 6.4% Less RPM (187 RPM drop @ 60 MPH, high gear)* Speedo Recalibration Unit NMZ-NSIM-01 is available if required.* Long Life SteelTech Tips:- * Will Not Fit Touring Models.* Pulleys with more…
-
$353.00
Suggested Additional Purchase: Part # PBI-291 (Lock Nut)Features & Benefits:-* 32 Tooth Pulley Stock Replacement* Long Life Steel* Replaces OEM # 40659-06Proudly Manufactured in the USA by Andrew Products
Showing 49–64 of 112 results