Showing 1–16 of 57 results
-
$1,242.00
Features & Benefits:-* Hard-mounted riser leg and relocated rubber isolator* Far less vibration and a much better bar feel* Available in either 1-1/8in. for moto style bars or 1in. for most standard Harley style bars* Bottom clamp has an opening to accommodate hidden wiring* 3.5in. on center for standard OEM style Harley fitment* Bushing life…
-
$289.00
Features & Benefits:-With the Kraus Universal T-Bar Clamp, you can mount your gauges in a variety of different ways on your Kraus Isolated Risers or Aftermarket T-Bars. Put your your gauges exactly where you want them!Works well with:-* Isolated Riser Kits # KRA-UN-ISO-**-A* Road Glide Gauge Bezel # KRA-ST-IN-03-A* Lowrider Twin Gauge Bucket # KRA-SF-IN-24-A*…
-
$416.00
Features & Benefits:-The T-Rex Pull Back Plate mounts to the top of the triple tree and moves your bar mounts towards the rider 2.5in. The T-Rex plate adds 1in. of height. Fits 2018 and Up M8 Softails.Proudly made in the USA by Kraus Motor Co.!
-
$618.00
Features & Benefits:-The Softail rear radial caliper mount allows you to run a single 108mm radial caliper on the rear of most 2018up Softails.* Will not fit Low Rider S or ST – they use # KRA-SF-BR-01-A* 108mm radial caliper bolt spacing* For 25mm stock diameter axle* This mount will allow fitment of commonly found…
-
$74.00
Features & Benefits:-The Kraus Cartridge Pull Rod Tool will help in installation of specific Ohlins cartridges and forks. This tool comes with M8x1.25, M10x1.25, and M12x1.25 thread sizes allowing it to be used in other applications as well. Designed and engineered to be used with Kraus KRT Forks (FF52X), Dynamoto Forks (FGRT 205s), Ohlins FKS…
-
$89.00
* The Kraus 50mm Fork Cap Tool will help in installation of specific Ohlins cartridges and forks.* This tool has an eight sided octagon shape measured 50mm side to side.* Designed and engineered to be used with the Ohlins FKS 508 model cartridge.Proudly made in the USA by Kraus Motor Co.!
-
$89.00
* The Kraus 41mm Fork Cap Tool will help in installation of specific Ohlins cartridges and forks.* This tool has an eight sided octagon shape measured 41mm side to side.* Designed and engineered to be used with Ohlins FKS 212, FKS 221 and FKS 228 model cartridges.Proudly made in the USA by Kraus Motor Co.!
-
$1,106.00
Features & Benefits:-* Hard-mounted riser leg and relocated rubber isolator* Far less vibration and a much better bar feel* Available in either 1-1/8in. for moto style bars or 1in. for most standard Harley style bars* Bottom clamp has an opening to accommodate hidden wiring* 3.5in. on center for standard OEM style Harley fitment* Bushing life…
-
$256.00
Features & Benefits:-Our Isolated Riser Legs allow you to adjust the height of your risers without buying a whole new Kraus Isolated Riser Kit. Our modular system works to provide you with the ultimate in ergonomics.When installing on Straight Isolated Risers:3.5in. Legs = 6in. Risers5.5in. Legs = 8in. Risers7.5in. Legs = 10in. Riser9.5in. Legs =…
-
$206.00
Features & Benefits:-Our Isolated Riser Legs allow you to adjust the height of your risers without buying a whole new Kraus Isolated Riser Kit. Our modular system works to provide you with the ultimate in ergonomics.When installing on Straight Isolated Risers:3.5in. Legs = 6in. Risers5.5in. Legs = 8in. Risers7.5in. Legs = 10in. Riser9.5in. Legs =…
-
$416.00
Features & Benefits:-This fitment for the Raptor Pull Back Plate is designed for 2018 and up Softails. Bolt it to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5in.* The Raptor Plate adds 2.5in. of total height to the bar/riser* Total height may vary slightly depending on the bushing…
-
$416.00
Features & Benefits:-For bikes with batwing fairings. The T-Rex Plate moves the bars up 1in. and back 2.5in. towards the rider to clear the navigation screen and stereo so you can run risers or T-Bars. Fork lock and accessory features will not be functional on your stock key switch. You can have your stock key…
-
$219.00
Features & Benefits:-The Isolated Riser Top Gauge Mount allows you to mount Kraus gauge housings directly to your Isolated Risers Top Plate. The new style mount can be mounted right side up or upside down for more adjustability. Top Plate not included.Works well with:-* Isolated Riser Kits # KRA-UN-ISO-**-A* Road Glide Gauge Bezel # KRA-ST-IN-03-A*…
-
$126.00
Features & Benefits:-This 3 inch extension allows you to mount any Kraus gauge housing in a variety of different ways. Whether you use our Universal T-Bar Clamp or Isolated Riser Top Gauge Mount, you can put your gauges exactly where you can see them.Works well with:-* Isolated Riser Kits # KRA-UN-ISO-**-A* Universal T-Bar Clamp #…
-
$469.00
Features & Benefits:-The Kraus M8 Low Rider S Gauge Bucket allows you to relocate the stock gauge to a more visible and ergonomic position. This beautifully machined piece encases your stock Harley gauge and mounts in a variety of different ways. Whether you use our Universal T-Bar Clamp or Isolated Riser Top Gauge Mount, you…
Showing 1–16 of 57 results