Showing 145–160 of 220 results
-
$496.00
Features & Benefits:-* Used to remove & install camshafts & bearings.* Provides precision alignment of camshafts in the support plate.Tech Tips:-* Will Not Fit Dyna 2006.Proudly Made in the USA by JIMS !
-
$143.00
Features & Benefits:-* Designed to lock the camshafts & crankshaft sprockets when removing, replacing & torquing the sprocket bolts.* Made of non-marring Delrin.* Includes Instructions.Tech Tips:-* Will Not Fit Dyna 2006.Proudly Made in the USA by JIMS !
-
$190.00
* Also fits Milwaukee 8* Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts* Made of non-marring Delrin* Instructions included* Made in the U.S.A.
-
$136.00
Features & Benefits:-* Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams.* Also checks spring loads on chain tensioners* Includes instructionsTech Tips:-* Will Not Fit Dyna 2006.Proudly Made in the USA by JIMS !
-
$418.00
* Presses in the inner cam bearing* Designed to press from letter side of the inner cam bearing by putting all the pushing pressure to the very outer wall of bearing shell* Eliminates any damage to the bearing, cam and cases* Stops at the case and sets the bearing depth to .023in. to .028in. below…
-
-
$503.00
Removing or installing the high output alternator rotor on the M8™ requires a unique tool, and trust us – those magnets donÂ’t budge easily! At JIMS we understand that using pry bars or striking with a hammer can not only damage the rotor housing, but the magnets as well. This tool easily removes the rotor…
-
$159.00
Suggested additional Purchase JM-906
-
$2,892.00
Features & Benefits:-* Suggested additional purchase, Timken Bearing # SS31-4013Tech Tips:-* May cause a slight increase in engine noise
-
$36.00
Features & Benefits:-* Sold as a Pack (4)* Replaces OEM # 18570-38Made in the U.S.A.
-
$154.00
* This tool allows the tappets and anti-rotation pins to be safely and accurately stored for proper reinstallation.* Tappet locations are clearly referenced on the tool which also serves to protect the tappets from damage when removed from the engine.
-
$206.00
* Made from 7075-T651 aluminum* Precision machined with helical-style grooves for better lubrication* Sold each* Replaces OEM # 18607-57Tech Tips:-* 4 Required per Bike.* Made in the U.S.A.
-
$241.00
* Standard solid rollers are designed around three working parts* The outer wheel/roller has a 27% greater wall size – less harmonic distortion for better tracking of cam lobe* Pin bearings are decreased in size by 12%, which increases rpm for more precise tracking* Axle size is increased 36% and doubles as the inner race,…
-
$203.00
Features & Benefits:-* Use in cast iron or aluminum tappet blocks.* Produced from billet bearing steel.* Increases roller life. * exact cam timing.Tech Tips:-* Recommend tappet to block clearance .0007in. – .0012in.People who Buy this Product also Purchase:-* SS330-0379 (x 4) when wishing to run Hydraulic Tappets.* SS93-5067 (x 1) when wishing to run Solid…
-
$49.00
* Size:- (M) Medium. * Colour:- White.
-
Showing 145–160 of 220 results