View cart “Plug-n-Play CanBus Load Equalizer. Fits Rear Turn Signals on Softail 2011-2017 & Dyna 2012-2017.” has been added to your cart.
Showing 1–16 of 19 results
-
$141.00
Fitment: * Sportster 1999-2003, Dyna 1997-2011, Softail 1997-2010, Touring 1996-2013.* Eliminates erratic or non-blinking turn signals when converting to LED* Designed specifically to work with OEM alarm systems (TSSM) or turn signal modules (TSM)* Solid-state waterproof module produces no heat* Ideal for parade use, allowing emergency flashers to blink for extended periods of time* Made…
-
$121.00
Our hard-wired Load Equalizer-03 is designed to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat.Fitment: * Sportster 1991-2013, Dyna 1991-2011, Softail 1990-2010, Touring 1990-2013, V-Rod 2002-2017 & Street 2015up.Tech Tips:-Keep in mind, this is a in.hard-wiredin. model and you could purchase a 100% plug-n-play…
-
$141.00
Plug-n-Play Can/Bus Load Equalizer™ 2011-17 Softail exc. FXSB & FLS (see below) & 2012-Up Dyna Listed Models (FXDF, FXDB/P, FXDWG, FLD, FXDC/L, FLSTC, FLSTF/B, FLSTN, FXST)* Deutsch ConnectorsTech Tips:-Will not work on Breakout’12up or Slim’11up using Run/Brake/Turn Lighting. These models require BMP-LE-CB-B
-
$170.00
Plug-n-Play Can/Bus Load Equalizer™ All 2014-Up Touring Models (With and Without Fairing)Our Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on ‘11-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of the bike.
-
$191.00
Features & Benefits:-* 8-Position Female Deutsch Connector* Provides a less expensive alternative to the factory flasher module. * Built in 11-second flasher * Load Equalizer allows the use of small incandescent bulbs, halogen bulbs or LEDÂ’s without any rapid-flashing issues. * Includes a 4-way Hazard flasher feature for safety or parade mode just like the…
-
$191.00
Features & Benefits:-* 8-Position Male Deutsch Connector* Provides a less expensive alternative to the factory flasher module. * Built in 11-second flasher * Load Equalizer allows the use of small incandescent bulbs, halogen bulbs or LEDÂ’s without any rapid-flashing issues. * Includes a 4-way Hazard flasher feature for safety or parade mode just like the…
-
$170.00
Features & Benefits:-* AMP 10 Pin Male Plug.* Provides a less expensive alternative to the factory flasher module. * Built in 11-second flasher * Load Equalizer allows the use of small incandescent bulbs, halogen bulbs or LEDÂ’s without any rapid-flashing issues. * Includes a 4-way Hazard flasher feature for safety or parade mode just like…
-
$151.00
Features & Benefits:-* Upgrade your old style 1973- Early 1990’s Flasher Can Turn Signals to Automatic Self Cancel.* Universal fit for Custom Builds * Built in 11-second flasher * Load Equalizer allows the use of small incandescent bulbs, halogen bulbs or LEDÂ’s without any rapid-flashing issues.
-
$77.00
Hard-Wired PREMIUM Load EqualizerTech Tips:-The LE-02 Module will PRODUCE HEAT like most electrical devices so use caution when mounting the module close to wire looms or plastics. This low cost module is recommended for MEDIUM usage and will allow VERY LIMITED USAGE of the 4-way safety flashers when pulling over for emergency purposes only.
-
$63.00
Hard-Wired ECONOMY Load EqualizerTech Tips:- The LE-01 Module will PRODUCE HEAT like most electrical devices so use caution when mounting the module close to wire looms or plastics. This low cost module is recommended for LIGHT usage and will allow EXTREMELY LIMITED USAGE of the 4-way safety flashers when pulling over for emergency purposes only….
-
$121.00
Part number BMP-LE-CB-TL is a must when swapping out OEM tail/brake lights with custom LEDs or removing it all together. It is a Taillight Load Equalizer that plugs in between the rear fender harness and allows users to remove the center taillight without producing annoying codes. This gives riders endless possibilities when customizing your ride!…
-
$191.00
Fitment: Carbureted Models Only with AFTER-MARKET IGNITION MODULES ONLY!Softail 2001-2006 (2001-2003 Need DTT-1008 & 2004-2006 need DTT-1009)Dyna 2001-2006 (2001-2003 Need DTT-1008 & 2004-2006 need DTT-1009)Touring 2001-2006 (2001-2003 Need DTT-1008 & 2004-2006 need DTT-1009)Sportster 2004-2006 (2004-2006 need DTT-1009)Features & Benefits:-* 12-Position Male Deutsch Connector* Provides a less expensive alternative to the factory flasher module. * Built…
-
$151.00
Fitment: * Softail Rocker 2008-2011.* Eliminates erratic or non-blinking turn signals when converting to LED* Designed specifically to work with OEM alarm systems (TSSM) or turn signal modules (TSM)* Solid-state waterproof module produces no heat* Ideal for parade use, allowing emergency flashers to blink for extended periods of time* Made in the USA
-
$141.00
Fitment: * Sportster 2004-2013.* Eliminates erratic or non-blinking turn signals when converting to LED* Designed specifically to work with OEM alarm systems (TSSM) or turn signal modules (TSM)* Solid-state waterproof module produces no heat* Ideal for parade use, allowing emergency flashers to blink for extended periods of time* Made in the USA
-
$141.00
Hard-Wire Metric Load Equalizer (Fits most metric motorcycles Tech Tip:-* Does Not Fit Honda Models.
-
$71.00
Hard-Wire Honda Load Equalizer (Fits all Honda motorcycles)
Showing 1–16 of 19 results