Showing 49–64 of 91 results
-
$302.00
Use this tool to rotate the flywheel / piston assembly, with the engine still in frame or on a bench. This tool is used to rotate the flywheel assembly when doing pushrod adjustments, when building big inch engines, checking operating clearances such as piston to piston, or valve to valve. Can also be used to…
-
$302.00
Use this tool to rotate the flywheel / piston assembly, with the engine still in frame or on a bench. This tool is used to rotate the flywheel assembly when doing pushrod adjustments, when building big inch engines, checking operating clearances such as piston to piston, or valve to valve. Can also be used to…
-
$206.00
Features & Benefits:-* Also Gear Drive Backlash.This tool simplifies and speeds the process of checking crankshaft run out on both M8 model engines with the crankshaft installed. The tool mounts to the cam chest side of the engine case using the designated mounting holes of the tool combined with the handled thumb screws and the…
-
-
$206.00
This tool simplifies and speeds the process of checking crankshaft run out on both Twin Cam and EVO model engines with the crankshaft installed. The tool mounts to the cam chest side of the engine case using the designated mounting holes of the tool combined with the handled thumb screws and the case cam cover…
-
$712.00
The Harley-Davidson® Milwaukee Eight crankcase is a robust and sealed engine case when assembled correctly. In order to perform any type of lower end service or performance work, it is necessary to split the crankcase into halves. Prying the cases apart with a screwdriver can not only damage the crankcase, it can also cause injury…
-
$496.00
Features & Benefits:-* Used to remove & install camshafts & bearings.* Provides precision alignment of camshafts in the support plate.Tech Tips:-* Will Not Fit Dyna 2006.Proudly Made in the USA by JIMS !
-
$361.00
* This pressure test tool is a must for any Twin Cam engine builder. Bench test the camplate before installation, cycle the pressure relief valve testing operation assuring the valve moves freely, seats and seals. Leakage at the relief valve will reduce oil pressure.* This tool allows the engine builder to know what PSI the…
-
$179.00
Features & Benefits:-* VVT M-Eight Cam Bolt Torque reaction tool. This tool allows removal and instal of the VVT cam bolt, referenced by the factory as the spool valve.Proudly Made in the USA by Feuling !* Replaces OEM # HD-53289
-
$105.00
Features & Benefits:-* Designed to hold the cam phaser when removing the center bolt* CNC machined from 4130 steel* Required tool to access the cam chestProudly Made in the USA by S&S Cycle !* Replaces OEM # HD-53289
-
$143.00
Features & Benefits:-* Designed to lock the camshafts & crankshaft sprockets when removing, replacing & torquing the sprocket bolts.* Made of non-marring Delrin.* Includes Instructions.Tech Tips:-* Will Not Fit Dyna 2006.Proudly Made in the USA by JIMS !
-
$190.00
* Also fits Milwaukee 8* Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts* Made of non-marring Delrin* Instructions included* Made in the U.S.A.
-
$136.00
Features & Benefits:-* Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams.* Also checks spring loads on chain tensioners* Includes instructionsTech Tips:-* Will Not Fit Dyna 2006.Proudly Made in the USA by JIMS !
-
$418.00
* Presses in the inner cam bearing* Designed to press from letter side of the inner cam bearing by putting all the pushing pressure to the very outer wall of bearing shell* Eliminates any damage to the bearing, cam and cases* Stops at the case and sets the bearing depth to .023in. to .028in. below…
-
$2,892.00
Features & Benefits:-* Suggested additional purchase, Timken Bearing # SS31-4013Tech Tips:-* May cause a slight increase in engine noise
-
$154.00
* This tool allows the tappets and anti-rotation pins to be safely and accurately stored for proper reinstallation.* Tappet locations are clearly referenced on the tool which also serves to protect the tappets from damage when removed from the engine.
Showing 49–64 of 91 results