Showing 241–256 of 307 results
-
$420.00
Add unique and intense bright white LED light to the front of your bike with the Fang Lower Fairing Lights. These LEDs use our new ultra bright light technology for a radiant uniform glow.The Fang Lower Fairing Lights create a wide spread of light, making them great for dark parking lots and low speed maneuvering….
-
$325.00
Intense, fully diffused L.E.D. lighting with full-time white running lights and amber switchback turn signals when activated. Significantly enhance your front end’s styling and visibility toward oncoming motorists with these direct snap-in replacements for the black plastic radiator grills or filler plates on late-model H-D fairing lowers.Features & Benefits:-* Durable injection-molded ABS construction with smoked…
-
$175.00
Features & Benefits:-* Electronic universal solution for motorcycle lights such as indicators, tail/brake light and position light* Compatible with classic bikes, new models and modern operating systems* Correct flashing frequency* No error messages in the cockpit* No disruptive quiescent currents* Installation of indicators with higher power consumption [watts] than original* Installation of indicators with lower…
-
$151.00
Fitment: * Softail Rocker 2008-2011.* Eliminates erratic or non-blinking turn signals when converting to LED* Designed specifically to work with OEM alarm systems (TSSM) or turn signal modules (TSM)* Solid-state waterproof module produces no heat* Ideal for parade use, allowing emergency flashers to blink for extended periods of time* Made in the USA
-
$147.00
Fitment: * Sportster 1999-2003, Dyna 1997-2011, Softail 1997-2010, Touring 1996-2013.We make it easy to eliminate nonfunctioning, erratic or rapid/hyper flash situations when swapping stock incandescent turn signals with low-draw L.E.D. bulbs or turn signals. This all-new design produces virtually no heat unlike traditional resistor-based designs, and features simple plug-&-play installation for most ’97-’13 Harley-Davidson models.*…
-
$141.00
Fitment: * Sportster 1999-2003, Dyna 1997-2011, Softail 1997-2010, Touring 1996-2013.* Eliminates erratic or non-blinking turn signals when converting to LED* Designed specifically to work with OEM alarm systems (TSSM) or turn signal modules (TSM)* Solid-state waterproof module produces no heat* Ideal for parade use, allowing emergency flashers to blink for extended periods of time* Made…
-
$141.00
Fitment: * Sportster 2004-2013.* Eliminates erratic or non-blinking turn signals when converting to LED* Designed specifically to work with OEM alarm systems (TSSM) or turn signal modules (TSM)* Solid-state waterproof module produces no heat* Ideal for parade use, allowing emergency flashers to blink for extended periods of time* Made in the USA
-
$121.00
Our hard-wired Load Equalizer-03 is designed to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat.Fitment: * Sportster 1991-2013, Dyna 1991-2011, Softail 1990-2010, Touring 1990-2013, V-Rod 2002-2017 & Street 2015up.Tech Tips:-Keep in mind, this is a in.hard-wiredin. model and you could purchase a 100% plug-n-play…
-
$63.00
Hard-Wired ECONOMY Load EqualizerTech Tips:- The LE-01 Module will PRODUCE HEAT like most electrical devices so use caution when mounting the module close to wire looms or plastics. This low cost module is recommended for LIGHT usage and will allow EXTREMELY LIMITED USAGE of the 4-way safety flashers when pulling over for emergency purposes only….
-
$141.00
Hard-Wire Metric Load Equalizer (Fits most metric motorcycles Tech Tip:-* Does Not Fit Honda Models.
-
$71.00
Hard-Wire Honda Load Equalizer (Fits all Honda motorcycles)
-
$170.00
Plug-n-Play CanBus Load Equalizer™ fits 2012-17 FXSB and 2011-17 FLS models only. Also fits Ride Nice Tail tidy kit on 2018up FXSB.* Deutsch ConnectorsOur Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on ‘11-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of…
-
$141.00
Plug-n-Play Can/Bus Load Equalizer™ 2011-17 Softail exc. FXSB & FLS (see below) & 2012-Up Dyna Listed Models (FXDF, FXDB/P, FXDWG, FLD, FXDC/L, FLSTC, FLSTF/B, FLSTN, FXST)* Deutsch ConnectorsTech Tips:-Will not work on Breakout’12up or Slim’11up using Run/Brake/Turn Lighting. These models require BMP-LE-CB-B
-
$121.00
Part number BMP-LE-CB-TL is a must when swapping out OEM tail/brake lights with custom LEDs or removing it all together. It is a Taillight Load Equalizer that plugs in between the rear fender harness and allows users to remove the center taillight without producing annoying codes. This gives riders endless possibilities when customizing your ride!…
-
$170.00
Plug-n-Play Can/Bus Load Equalizer™ All 2014-Up Touring Models (With and Without Fairing)Our Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on ‘11-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of the bike.
-
$121.00
* Hard-Wire Can/Bus Load Equalizer, normally used for Front Turn Signals only & in conjunction with Plug-n-play rear module.* Can be used on the rear on models where the Plug-n-Play module is not available * Fits: 2011-Up Softail, 2012-2017 Dyna, ALL 2014-Up Models.
Showing 241–256 of 307 results