Showing 33–48 of 77 results
-
$277.00
Features & Benefits:-* Chrome-Moly Steel 7/16in. diameter for maximum strength.* Replaces OEM # 17897-89 & 17904-89Tech Tip:-* It is necessary to disassemble the rocker arm/rocker box to remove the stock one piece pushrod cover.* Prior to Start-up, the engine should be wound over with spark plugs removed until oil reaches the top pushrod ball /…
-
$281.00
Features & Benefits:-* Chrome-Moly Steel 7/16in. diameter for maximum strength.* Replaces OEM # 17901-86 & 17904-86Tech Tip:-* For a quick & Easy Install, simply cut the old pushrods.* Prior to Start-up, the engine should be wound over with spark plugs removed until oil reaches the top pushrod ball / rocker arm socket.Proudly Made in the…
-
$247.00
Features & Benefits:-* Chrome-Moly Steel Pushrods for maximum strength.* Stock diameter tubing – eliminates pushrod cover interferenceTech Tips:-* These pushrods replace the OEM steel rods* Works with the stock hydraulic unit JM-2370 (OEM 17920-53A) and the stock style Hydraulic Tappet JM-2462-1 (OEM 185522-53A) * Also works with JM-2459-1 PowerGlide Hydraulic TappetProudly Made in the USA…
-
$389.00
Features & Benefits:-* 7/16in. diameter, aircraft grade 4130 alloy seamless Chrome-Moly.* Strongest pushrods available.* Replaces OEM # 18404-08, 17922-99 & 17923-99Tech Tips:-* Can be installed using the Original H-D pushrod Covers which is cost effective, albeit getting to the adjusters can be slightly more tedious than similar S&S kits supplied with the Pushrod Covers.* Prior…
-
$419.00
Features & Benefits:-* For use with Stock Height 4.937in. Cylinders. * Sold as a Kit.Tech Tip:-* OEM pushrod cover cups & springs must be re-used.* Lifter cover screws will need to be removed to facilitate fitment if leaving rocker covers in place.* Prior to Start-up, the engine should be wound over with spark plugs removed…
-
$319.00
Features & Benefits:-* S&S solid lifter conversion kit with adjustable pushrods for 1966-’84 HD Shovelhead engines with stock 5.330 cylinders* Converts stock hydraulic lifters to solid, non-adjustable lifters.* Includes all parts needed for converting to solid lifters: four adjustable steel pushrods and four non-adjustable lifter inserts that replace the stock hydraulic units. Also includes adapters…
-
$74.00
Features & Benefits:-* 3.330in. – Stock Length Steel Pushrod Cover Keepers for Shovel & Evo* Also fits 98ci & 124ci S&S Evo Style Engines. * Replaces OEM #’s 17949-40 & 17950-66.* Sold as a Pack (4).Proudly Made in the USA by S&S Cycle !
-
$231.00
Features & Benefits:-* Includes Upper, Lower and Inner Removable Pushrod Covers.* Sold as a Kit. Tech Tip:- * Use when Installing Adjustable Pushrods.Proudly Made in the USA by Colony Machine !
-
$220.00
Features & Benefits:-* Set of 4 for One Complete Engine.* Kits Includes Upper & Lower Tubes, Clips, Cups, Springs & Washers. * Replaces OEM # 17935-79, 17938-48, 17938-79, 17950-66
-
$692.00
Features & Benefits:-* Fits Big Twin 1984-1999 & Sportster 1986-1990.* Replacement hydraulic tappets.* HL2T Kit Not included.* Sold as a Pack (4).* Replaces OEM # 18523-86 & 18568-98Tech Tips:-* Use an oil can to Pump the lifter full of oil prior to Assembly.Proudly Made in the USA by S&S Cycle !
-
$59.00
Features & Benefits:-Made in the USA* Replaces OEM # 18535-99Tech Tips:-FEULING recommends a max clearance of 0.002-0.003 between lifter and anti-rotation pin. Excessive clearance will create excessive noise. See FEULING Part #FE-4102 for oversize pins.
-
$206.00
Features & Benefits:-* Sold Each.* Replaces OEM # 17920-53AProudly Made in the USA by S&S Cycle !
-
$311.00
* These tappets will run in cast iron or aluminum tappet blocks* Recommend fitting the tappets to the blocks with a clearance of .0007in. to .0012in.* Produced from billet bearing steel* A true center-line for roller life and exact cam timing* State of the art pushrod seat, machined with the same segmented parabolic cup as…
-
$1,155.00
Features & Benefits:-* Precesion machined tappets complete with premium hydraulic unitsProudly made in the USA by S&S Cycle!
-
$300.00
Features & Benefits:-* Run in cast iron or aluminum tappet blocks* Produced from billet bearing steel* A true center-line for roller life and exact cam timing* State of the art pushrod seat, machined with the same segmented parabolic cup as the JIMS roller rockers* Includes State of the art hydraulic unit.Tech Tips:-* Use with AP-240030,…
-
$339.00
Features & Benefits:-* Fits Evolution Engines* Made in Japan* Sold as a Pair* Chrome PlatedKit includes:* Lifter block Front & Rear* 8 x 1/4in.-20 ScrewsSuggested Additional Purchase:Lifter Block Gaskets # JGI-18633-48-KF* Replaces OEM # 18540-83 * Replaces OEM # 18542-83
Showing 33–48 of 77 results