Showing 17–32 of 132 results
-
$79.00
Features & Benefits:-* Replacement intake valve for S&S Super Stock heads.* Fits Big Twin 1984up, Sportster 1986-2003 & S&S X-Wedge. * 2.000in. x 4.450in. @ 1.943in. Gauge.* Sold Each.Proudly Made in the USA by S&S Cycle !
-
$71.00
* Stock length & head diameter* Triple Groove* Extreme Duty* High Flow* one piece forged racing grade stainless steel alloy. * Black Nitride process creates a valve that is smoother and stronger than O.E.M. * Stems are centerless ground for a longer life* 45o angle below the lock groove to facilitate the valve seal installation*…
-
$56.00
* Stock length & head diameter* Extreme Duty* High Flow* one piece forged racing grade stainless steel alloy. * Liquid nitriding process creates a valve that is smoother and stronger than O.E.M. * Stems are centerless ground for a longer life* 45o angle below the lock groove to facilitate the valve seal installation* Replaces OEM…
-
$20.00
* Designed for Harley-Davidson heads* Same Guide fits Inlet & Exhaust* Use with OEM style valve seals * Manganese-Bronze* High temp viton o-ring seal* Smooth lead-in* CNC machined* Guide ID unfinished * OD = .566in. Std size* ID = .375in.* AV-VGRC-3782 Reamer recomended for AV&V guides & valves * Replaces OEM # 18138-79
-
$56.00
* Stock length & head diameter* Triple Groove* Extreme Duty* High Flow* one piece forged racing grade stainless steel alloy. * Black Nitride process creates a valve that is smoother and stronger than O.E.M. * Stems are centerless ground for a longer life* 45o angle below the lock groove to facilitate the valve seal installation*…
-
$159.00
Features & Benefits:-* Replacement intake valve for S&S Super Stock Heads.* Fits Big Twin 1984up, Sportster 1986-2003 & S&S X-Wedge. * 1.605in. x 4.428in. @ 1.509in. Gauge.* Sold Each.Proudly Made in the USA by S&S Cycle !
-
$56.00
* Highest flow level on the market. * One piece forged racing grade stainless steel alloy.* hard black nitride finish.* bearing quality hardened tip at the end of the stem to prevent premature wear with high-lift applications. * 45o angle below the lock groove to facilitate the valve seal installation.* Heat treated with a special…
-
$29.00
Features & Benefits:-* Sold as a Pack (4).Tech Tips:-* In November of 2014, S&S switched to powder metal valve guides. * They take this larger seal. * The old style cast iron guides use a smaller seal. * The best way to get the correct guides & seals would be using the serial number on…
-
$17.00
* For use with in.Double Springin. or BeeHive 2005-2017 Single .650in. High lift Spring kit * Resists Higher temp than other viton seals* Use on TC, XL & Buell 2005-2021 (7mm valves and double lip spring)* Use with AV-VG6600 / 6700 series valve guides* Sold as a pack of 4.
-
$376.00
Features & Benefits:-* Includes white silicone cap.Proudly Made in the USA by S&S Cycle !
-
$97.00
Features & Benefits:-* 14mm Plugs.* Sold as a Pack (2).Proudly Made in the USA by S&S Cycle !
-
$3,091.00
Features & Benefits:-* S&S Super Stock Cylinder Head.* Includes Lower SS90-4120 lower Rocker Gaskets * Includes Head bolt kit SS930-0027, replaces the short H-D head bolts .* Includes Decompression Release Block-Off Plugs SS90-4916-2* Compression releases may be purchased separately if desired.* Accepts S&S or OEM pistons – refer to Compression Ratio Chart for S&S Super…
-
$3,091.00
Features & Benefits:-* Accepts S&S or OEM pistons.* Accepts up to 640 lift cams with S&S pistons or if using with stock pistons valve reliefs must be machined in the pistons due to larger valves.* 2.000in. Intake Valves & 1.605in. Exhaust Valves.* Includes Lower Rocker Gasket to use with OEM rocker covers # SS90-4120* Includes…
-
$3,181.00
Features & Benefits:-* Accepts S&S or OEM Pistons.* Accepts up to 640 Lift Cams with S&S Pistons or 585 Lift with OEM Pistons.* 1.940in. Intake Valves & 1.575in. Exhaust Valves.* Includes Lower Rocker Gasket to use with OEM Rocker Covers # SS90-4120* Includes 4 Head bolts, use in place of the in.shortin. H-D head bolts…
-
$2,637.00
Features & Benefits:-* 585in. Lift.* Heads works with 3.5in. & 3-5/8in. cylinders.* Intake ports are the same size as OEM so the H-D manifold bolts on* Works with OEM style flat top pistons.* Front head is machined to accept OEM cyl head temp sensor on EFI models 1995-1998.* Slight increase in compression CR = 8.8:1…
-
$2,790.00
Features & Benefits:-* 585in. Lift.* Works with 3-1/2in. & 3-5/8in. Cylinders.* Intake ports are the same size as OEM so the HD manifold bolts on.* Works with OEM style flat top pistons.* Front head is machined to accept OEM cyl head temp sensor on EFI models 1995-1998. * Slight increase in compression. CR = 8.8:1…
Showing 17–32 of 132 results