View cart “521 Reaper Chain Drive Camshaft. Fits Milwaukee-Eight 2017up.” has been added to your cart.
Showing 273–288 of 297 results
-
$42.00
# The Feuling rebuild kit includes everything needed to properly rebuild the high volume Feuling Twin Cam Oil Pumps.# Kit includes new O-rings, separator plate and installation instructions.Fits Feuling oil pumps FE-7060 & FE-7062
-
$2,949.00
Complete Camchest Kits include: FEULING high volume Oil pump, high flow Camplate, REAPER Series Camshafts, hydraulic roller Lifters, adjustable Pushrods, Timken Bearings, Gaskets, O-rings, Exhaust gaskets, ARP fasteners, washers, moly paste, Loctite, and hardware.543 CAMS – The Freeway Flyer, a great camshaft for those who want more top end power than our 525 cam. Extremely…
-
$3,113.00
Features & Benefits:-* Includes all necessary components from top to bottom of the camchest conveniently packaged under 1 part number.* These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony. * Takes the guess work out of the ordering process and guarantees…
-
$129.00
Fitment Details:-* Fits Touring Models. Tech Tips:-* Will Not Fit FXST & FXD Models.Proudly Made in the USA by Roland Sands Design !
-
$466.00
Features & Benefits:-* Recommended For use with oil pumps FE-7030* OE+ camplates are a direct bolt in replacement and will accept the factory oil pump.* OE+ stock replacement billet camplates are manufactured from 6061 aluminum providing increased rigidity and machined to FEULING’s® high tolerance standards. The pressure relief valve and spring are pre-set, matched and…
-
$667.00
NOTE: For use ONLY with FEULING oil pumps FE-7060.Features & Benefits:-* Requires FE-8016 Block Off Plate when using gear drive cams* Feuling camplates for Twin Cam engines increases engine oil flow and volume by enlarging critical oil passages and the oil pump reservoirs. The camplates are blue printed and matched to the Feuling oil pumps…
-
$509.00
Features & Benefits:-* Recommended For use with oil pumps FE-7010 * OE+ camplates are a direct bolt in replacement and will accept the factory oil pump* OE+ stock replacement billet camplates are manufactured from 6061 aluminum providing increased rigidity and machined to FEULING’s® high tolerance standards. The pressure relief valve and spring are pre-set, matched…
-
$656.00
NOTE: For use ONLY with FEULING oil pumps FE-7000 or FE-7050 & running GEAR drive cams.Features & Benefits:-* Feuling camplates for Twin Cam engines increases engine oil flow and volume by enlarging critical oil passages and the oil pump reservoirs. The camplates are blue printed and matched to the Feuling oil pumps which allow the…
-
$17.00
Features & Benefits:-* For all Big Twins from 1936 thru 1999.* Sold as a Pack (5).* Replaces OEM # 25551-36Proudly Made in the USA by Bender Cycle !
-
$998.00
Recommended for 89in.-100in. engines with 9.5:1 to 11.5:1 compression ratio. Provides best performance from 3500-6500 rpm using ported stock heads or S&S heads. Requires adjustable pushrods and covers (AP-292085, CM-2255-36, CM-2254-2), spring spacing or high lift valve springs (AV-VSK6000), and normal clearance checks.
-
$998.00
Recommended for 89in.-100in. engines with 9.5:1 to 11.5:1 compression ratio. Provides best performance from 3500-6500 rpm using ported stock heads or S&S heads. Requires adjustable pushrods and covers, spring spacing or high lift valve springs, and normal clearance checks.* Pushrods AP-292085* Covers XL’00-03 CM-2255-36 + CM-2254-2* Covers XL’04-21 CM-2253-36* Springs XL’00-03 AV-VSK6000* Springs XL’04-21 AV-VSK60007SG
-
$711.00
* Performance cams for 95-107+ inches, 10.0 to10.8 C.R. with high flow head setup. (2600-6400+ RPM).* Designed for use with High Lift Springs* Matching EZ-install pushrods kits are also available from Andrews. EZ-install pushrods do not require removal of gas tanks or rocker boxes when installing bolt-in camshafts.
-
$867.00
Chris RivasÂ’ Rocket Cams for Big Twins!Features & Benefits:-* Powerful street/cruising bolt-in cams* Best power with free-flow air cleaner and performance exhaust* Designed for 96ci – 107ci Engines with stock compression ratio or up to 10:1. * Above average mid-range power* Peak performance at 1500 to 5800 rpm * Designed as a Bolt-in on Twin…
-
$461.00
Chris RivasÂ’ Rocket Cams for Milwaukee 8!Features & Benefits:-* High performance only application* When you are looking to have the highest power in your pack of friends this is your cam! Designed specifically for that thrilling top end pull* Ported heads, high lift springs, free-flowing intake and exhaust are a must* Designed for 124ci+ Engines…
-
$588.00
** Clearances MUST be checked when installing this cam **612 E CAM – RACE SERIES CAMSHAFT Requires large bore size, ported cylinder heads, ported intake manifold, high flow valves and large throttle body. High flow air cleaner and triple stepped exhaust pipe highly recommended.Tech Tips:-* This aggressive camshaft requires high lift and higher load valve…
-
$536.00
538 Reaper Cam – Aggressive camshaft with a nasty sound. This camshaft revs up fast and pulls hard in engines with big bore cylinders, modified cylinder heads, inake, compression and exhaust. The REAPER 538 grind will shine in 124 and larger cubic inch engines with added compression ratio. Ported cylinder heads are not required but…
Showing 273–288 of 297 results