Showing 113–127 of 127 results
-
$466.00
Features & Benefits:-* Recommended For use with oil pumps FE-7030* OE+ camplates are a direct bolt in replacement and will accept the factory oil pump.* OE+ stock replacement billet camplates are manufactured from 6061 aluminum providing increased rigidity and machined to FEULING’s® high tolerance standards. The pressure relief valve and spring are pre-set, matched and…
-
$667.00
NOTE: For use ONLY with FEULING oil pumps FE-7060.Features & Benefits:-* Requires FE-8016 Block Off Plate when using gear drive cams* Feuling camplates for Twin Cam engines increases engine oil flow and volume by enlarging critical oil passages and the oil pump reservoirs. The camplates are blue printed and matched to the Feuling oil pumps…
-
$509.00
Features & Benefits:-* Recommended For use with oil pumps FE-7010 * OE+ camplates are a direct bolt in replacement and will accept the factory oil pump* OE+ stock replacement billet camplates are manufactured from 6061 aluminum providing increased rigidity and machined to FEULING’s® high tolerance standards. The pressure relief valve and spring are pre-set, matched…
-
$656.00
NOTE: For use ONLY with FEULING oil pumps FE-7000 or FE-7050 & running GEAR drive cams.Features & Benefits:-* Feuling camplates for Twin Cam engines increases engine oil flow and volume by enlarging critical oil passages and the oil pump reservoirs. The camplates are blue printed and matched to the Feuling oil pumps which allow the…
-
$711.00
* Performance cams for 95-107+ inches, 10.0 to10.8 C.R. with high flow head setup. (2600-6400+ RPM).* Designed for use with High Lift Springs* Matching EZ-install pushrods kits are also available from Andrews. EZ-install pushrods do not require removal of gas tanks or rocker boxes when installing bolt-in camshafts.
-
$733.00
587-HS: This cam was designed and optimized to be the best bolt-in cam for the OEM 110ci platform, dramatically increasing power and torque across the entire RPM range. Unlike many other cams, the 587 was designed to work with the larger valves and heavier springs that the CVO engines are equipped with. Specially designed cam…
-
$914.00
Features & Benefits:-* Great Way to Improve Performance at a reasonable Price.* Quick Installation – Reuses many of the Original Components.* Reliable Easy Starts on any engine using stock starter.* Save your starter and battery, automatic no buttons to push.* Designed for 88ci-106ci Engines with 9.7 to 10.5 Compression & Ported heads – Massive Horse…
-
$694.00
Chris RivasÂ’ Rocket Cams for Big Twins!Features & Benefits:-* Hot cam for upgraded engines 103in. to 110in. Cubic Inch* Ported heads free-flowing air cleaner and performance exhaust recommended. * Delivers constant power while reducing detonation* Designed for 103ci – 110ci Engines with a minimum 10:1 compression ratio* Peak performance at 2000 to 6000 rpm* Designed…
-
$733.00
A very popular grind and power favorite for many engine builders of hopped up modified engines with added compression and a great bolt in choice for higher compression 103 Twin Cooled Models. The RS575 is a great cam if you need a bolt-in now, with serious plans on upgrading for more compression or increased flow…
-
$867.00
Chris RivasÂ’ Rocket Cams for Big Twins!Features & Benefits:-* Powerful street/cruising bolt-in cams* Best power with free-flow air cleaner and performance exhaust* Designed for 96ci – 107ci Engines with stock compression ratio or up to 10:1. * Above average mid-range power* Peak performance at 1500 to 5800 rpm * Designed as a Bolt-in on Twin…
-
$711.00
* Specially designed for 96 & 103 engines with CR up to 10:1 (2200-5600 RPM range).* Matching EZ-install pushrods kits are also available from Andrews. EZ-install pushrods do not require removal of gas tanks or rocker boxes when installing bolt-in camshafts.
-
$711.00
* Hot street cams for 88 to 103 inches. 80+ rear wheel HP possible with well tuned 88 incher, 90+ HP with 95 inches and more with 103 . Smooth idle, broad torque (2200-5600 RPM) 9.0 to 9.5 CR.* Matching EZ-install pushrods kits are also available from Andrews. EZ-install pushrods do not require removal of…
-
$730.00
Features & Benefits:-Cam Covers are made of 6061 billet aluminum and feature a clear LEXAN window. They are sealed with an o-ring to prevent cracks & leaks.Proudly Made In The USA.
-
$137.00
* Stock Style Cam Chain Tensioners* Pair* Replaces OEM # 39968-06 & 39969-06Tech Tips:* Also fit’s 2006 Dyna (These use 2007-2017 Oiling Systems)
-
$54.00
* For use with Camplate FE-8015, FE-8033 & FE-8037* Blocks Tensioner Oil Feed Holes.* Made in the U.S.A.
Showing 113–127 of 127 results