Showing 145–160 of 160 results
-
$518.00
Features & Benefits:-* The PCC belt is manufactured by Gates Rubber. Gates is one of the OEMÂ’s to HD with this type of belt. * The belt is made with polyurethane with carbon cord this belt is a standard workhorse.Tech Tips:-* Count the Teeth on your Belt before Ordering!* Avoid Improper Handling – Twisting, Pinching,…
-
$438.00
Features & Benefits:-* The PCC belt is manufactured by Gates Rubber. Gates is one of the OEMÂ’s to HD with this type of belt. * The belt is made with polyurethane with carbon cord this belt is a standard workhorse.Tech Tips:-* Count the Teeth on your Belt before Ordering!* Avoid Improper Handling – Twisting, Pinching,…
-
$5,998.00
* BDL’s monster (ALL BILLET) in.TOP FUEL STREET DRIVEin. is ready for action. The all-new 14mm by 85mm wide (3-3/8in.) belt is the same that the Top Fuel racers use on the 600-plus-horsepower machines. * The newly designed Kevlar clutch consists of varying spring pressure to accommodate any size motor on the market. The all-new…
-
$4,824.00
Features & Benefits:-* 8mm drive with BDL clutch* Billet motor plate* All mounting components* Also included in this drive kit is BDL’s NEW Ball Bearing Clutch system!Tech Tips:-* Will fit with Floorboards* This is just a bolt in kit no modifying, The front pulley is designed to fit right into the spring part in.bellin. of…
-
$4,366.00
2in. belt drive fits 1990-2006 Softail models. Also included in this drive kit is BDL’s NEW Ball Bearing Clutch system!
-
$6,257.00
Tech Tips:-Designed for stock applications.Increasing the Horsepower & Torque of the engine will severely limit the life of the belt.
-
$2,748.00
Features & Benefits:-* Includes transmission mounted electric start plate with mini starter housing, pinion gear and starter ring gear guard.Tech Tips:-* Requires 1990-2006 style starter motor #ABR-80-1001
-
$1,142.00
* Fits chain final drive models only* Re-Uses OEM Clutch* Our 8mm belt drives have been around for many years. Most belt drive enthusiasts still think that these units are the best size and combination for all around riding and dependability. * Our Competitor Clutch # BDL-CC-100-S, can be used with these drives for superior…
-
$1,744.00
* Kit comes with Pinion Gear* Closed belt drive for Softail. Designed for a bolt-in application. Our clutch basket features 12 cylindrical replaceable clutch dogs, which allows our clutch steels to maintain constant contact. The polished pressure plate uses nine shoulder bolts and springs, which allows simple installation. Our Kevlar clutch plates give maximum performance….
-
-
-
$169.00
Requires the purchase of BDL-CPR-100 and BDL-HCA-100 to complete the installation. Fits all BDL belt drives with cable drive clutches 1990up except BDL-EVO-900, BDL-EVO-950, BDL-TF-1000 and BDL-TF-2000. Also works on BDL-SH-500 and BDL-SHS-600 kits.
-
$582.00
For models running 72T rear by 28T front pulleysREAR BELT – 149T (DOMESTIC CALIFORNIA, CANADA)Replaces OEM # 40105-04Features & Benefits:-* The PCC belt is manufactured by Gates Rubber. Gates is one of the OEMÂ’s to HD with this type of belt. * The belt is made with polyurethane with carbon cord this belt is a…
-
$4,997.00
Tech Tips:-BDL have eliminated the Front Pulley and Engine Shaft Support and Front Bearing of the Outbourd Support.The reason for this change was due to the many aftermarket components that come together on a special construction motorcycle, they found that a lot of these components do not allow proper alignment of the entire motorcycle.When using…
-
$4,907.00
Fitment Notes:- Offest Pulley Insert / Alternator engine shim may be required to finalise the belt & Pulley alignment* BDL have eliminated the Front Pulley and Engine Shaft Support and Front Bearing of the Outbourd Support.The reason for this change was due to the many aftermarket components that come together on a special construction motorcycle,…
-
$4,272.00
INCLUDES:# 8mm drive with BDL clutch# Billet motor plate# All mounting components# All new quiet clutch
Showing 145–160 of 160 results