Showing 1–16 of 19 results
-
$191.00
Fitment:All carbureted models with AFTER-MARKET IGNITION MODULES!* Softail 2001-2006 (2001-2003 need DTT-1008 & 2004-2006 need DTT-1009)* Dyna 2001-2006 (2001-2003 need DTT-1008 & 2004-2006 need DTT-1009)* Touring 2001-2006 (2001-2003 need DTT-1008 & 2004-2006 need DTT-1009)* Sportster 2004-2006 (2004-2006 need DTT-1009)All non CAN Bus EFI models with AFTER-MARKET ECMS!* Softail 2001-2010 (2001-2010 need Z309-460)* Rocker 2008-2010 (2008-2010…
-
$191.00
Features & Benefits:-* 8-Position Male Deutsch Connector* Provides a less expensive alternative to the factory flasher module. * Built in 11-second flasher * Load Equalizer allows the use of small incandescent bulbs, halogen bulbs or LEDÂ’s without any rapid-flashing issues. * Includes a 4-way Hazard flasher feature for safety or parade mode just like the…
-
$151.00
Features & Benefits:-* Upgrade your old style 1973- Early 1990’s Flasher Can Turn Signals to Automatic Self Cancel.* Universal fit for Custom Builds * Built in 11-second flasher * Load Equalizer allows the use of small incandescent bulbs, halogen bulbs or LEDÂ’s without any rapid-flashing issues.
-
$141.00
Fitment: * Sportster 1999-2003, Dyna 1997-2011, Softail 1997-2010, Touring 1996-2013.* Eliminates erratic or non-blinking turn signals when converting to LED* Designed specifically to work with OEM alarm systems (TSSM) or turn signal modules (TSM)* Solid-state waterproof module produces no heat* Ideal for parade use, allowing emergency flashers to blink for extended periods of time* Made…
-
$170.00
Plug-n-Play Can/Bus Load Equalizer™ All 2014-Up Touring Models (With and Without Fairing)Our Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on ‘11-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of the bike.
-
$77.00
Hard-Wired PREMIUM Load EqualizerTech Tips:-The LE-02 Module will PRODUCE HEAT like most electrical devices so use caution when mounting the module close to wire looms or plastics. This low cost module is recommended for MEDIUM usage and will allow VERY LIMITED USAGE of the 4-way safety flashers when pulling over for emergency purposes only.
-
$191.00
Features & Benefits:-* 8-Position Female Deutsch Connector* Provides a less expensive alternative to the factory flasher module. * Built in 11-second flasher * Load Equalizer allows the use of small incandescent bulbs, halogen bulbs or LEDÂ’s without any rapid-flashing issues. * Includes a 4-way Hazard flasher feature for safety or parade mode just like the…
-
$170.00
Features & Benefits:-* AMP 10 Pin Male Plug.* Provides a less expensive alternative to the factory flasher module. * Built in 11-second flasher * Load Equalizer allows the use of small incandescent bulbs, halogen bulbs or LEDÂ’s without any rapid-flashing issues. * Includes a 4-way Hazard flasher feature for safety or parade mode just like…
-
$121.00
Our hard-wired Load Equalizer-03 is designed to prevent rapid flashing turn signals. This unit is 100% solid state with thermal protection and produces virtually zero heat.Fitment: * Sportster 1991-2013, Dyna 1991-2011, Softail 1990-2010, Touring 1990-2013, V-Rod 2002-2017 & Street 2015up.Tech Tips:-Keep in mind, this is a in.hard-wiredin. model and you could purchase a 100% plug-n-play…
-
$170.00
Plug-n-Play CanBus Load Equalizer™ fits 2012-17 FXSB and 2011-17 FLS models only. Also fits Ride Nice Tail tidy kit on 2018up FXSB.* Deutsch ConnectorsOur Plug-n-Play CAN/Bus Load Equalizers are needed to prevent rapid-flashing turn signal indicators and BCM trouble codes on ‘11-Up HD CAN/Bus models when non-compliant turn signals are installed on the rear of…
-
$121.00
* Hard-Wire Can/Bus Load Equalizer, normally used for Front Turn Signals only & in conjunction with Plug-n-play rear module.* Can be used on the rear on models where the Plug-n-Play module is not available * Fits: 2011-Up Softail, 2012-2017 Dyna, ALL 2014-Up Models.
-
$239.00
All Badlands Illuminator Pro-III Modules are designed to provide you running light and turn signal functions to each of the front turn signals, running light, brake light and turn signal functions to each rear turn signal all on (1) wire per signal. The ILL-PRO-III also has left and right indicator light outputs for factory or…
-
$151.00
Fitment: * Softail Rocker 2008-2011.* Eliminates erratic or non-blinking turn signals when converting to LED* Designed specifically to work with OEM alarm systems (TSSM) or turn signal modules (TSM)* Solid-state waterproof module produces no heat* Ideal for parade use, allowing emergency flashers to blink for extended periods of time* Made in the USA
-
$141.00
Fitment: * Sportster 2004-2013.* Eliminates erratic or non-blinking turn signals when converting to LED* Designed specifically to work with OEM alarm systems (TSSM) or turn signal modules (TSM)* Solid-state waterproof module produces no heat* Ideal for parade use, allowing emergency flashers to blink for extended periods of time* Made in the USA
-
$63.00
Hard-Wired ECONOMY Load EqualizerTech Tips:- The LE-01 Module will PRODUCE HEAT like most electrical devices so use caution when mounting the module close to wire looms or plastics. This low cost module is recommended for LIGHT usage and will allow EXTREMELY LIMITED USAGE of the 4-way safety flashers when pulling over for emergency purposes only….
-
$141.00
Hard-Wire Metric Load Equalizer (Fits most metric motorcycles Tech Tip:-* Does Not Fit Honda Models.
Showing 1–16 of 19 results