Showing 1–16 of 114 results
-
$308.00
* 17T x 20T mainshaft 1st gear cluster with a 24T countershaft 1st gear.* Installation in 1980-86 4sp Big Twin requires purchase of a 21 tooth countershaft 2nd gear AP-202160.* Best choice for Superglides, choppers and lighter bikes. This is a no clunk 48 mph, 1st gear. * With Andrews 4 speed gears, transmissions last…
-
$370.00
Stock main drive gear (4TH) 26 Teeth.* (1936-1976) loose rollars OEM 35065-65* Replacement 4th gears are made with wider drive slots and steeper lead-in ramps for more positive 3-4 shifting.
-
$180.00
* Stock mainshaft 3rd (1.23 Ratio) (24T)* OEM 35306-59* Replacements for stock mainshaft 3rd. The design of drive slots on mainshaft gear has been upgraded to include lead-in ramps for quicker, more positive shifting.* With Andrews 4 speed gears, transmissions last longer, shift faster, and just plain run better.
-
$468.00
Features & Benefits:-* Made from high nickel alloy* Heat treated and shot-peened to give maximum durability & strength. * Replaces OEM # 35039-65
-
$381.00
Requires the purchase of:BAI-D26-0205 – Trans Nut Lock Plate Kit; BT’92-06 & XL’91upJGI-12067-A – Seal; Trans Main BT’L94-06 5spd Models OnlyBCM-7342 – Main Drive Seal Spacer; BT’L94up 5spdFeatures & Benefits:-* 34 Tooth Overdrive Pulley 6.4% Less RPM (187 RPM drop @ 60 MPH – hi gear)* Speedo Recalibration Unit DAK-SIM-1A is available if required.* Long…
-
$370.00
Requires the purchase of:BAI-D26-0205 – Trans Nut Lock Plate Kit; BT’92-06& XL’91upJGI-12067-A – Seal; Trans Main BT’L94-06 5spd Models Only (Each)BCM-7342 – Main Drive Seal Spacer; BT’L94up 5spdFeatures & Benefits:-* 32 Tooth Pulley Stock Replacement* Speedo Recalibration Unit DAK-SIM-1A is available if required.* Long Life Steel* Replaces OEM # 40210-85 # 40250-94Tech Tips:-* Fits 1986-2006…
-
$54.00
* Replaces OEM Shift Fork # 34158-36* One piece cold forged forks. Fully heat treated and black oxide coated, a must for all transmission rebuilds.
-
$414.00
Features & Benefits:-* Chrome-Moly Pushrods.* Replaces OEM # 17921-83, 17924-83, 17927-83, 17930-83 & 17900-87Tech Tips:-* These EVO Adjustable pushrods are NON EZ-install – Requires Top Rocker Cover removal for fitment* Prior to Start-up, the engine should be wound over with spark plugs removed until oil reaches the top pushrod ball / rocker arm socket.Proudly Made…
-
$328.00
Features & Benefits:-* Chrome-Moly Steel Pushrods for maximum strength.* Stock diameter tubing – eliminates pushrod cover interferenceTech Tips:-* These pushrods replace the OEM steel rods* Works with the stock hydraulic unit JM-2370 (OEM 17920-53A) and the stock style Hydraulic Tappet JM-2462-1 (OEM 185522-53A) * Also works with JM-2459-1 PowerGlide Hydraulic TappetProudly Made in the USA…
-
$1,712.00
Gear Kit * Includes all 6 gears, 2 shift clutches and 2 forks. * Shafts and small parts kits must be ordered separately.(early c/s required… uses stock loose rollers oem#9084 = rollers need to be sourced separate)* Andrews 4 speed gears, transmissions last longer, shift faster, and just plain run better.Tech Tips:-* 1st Ratio =…
-
$367.00
Stock main drive gear (4TH) 26 Teeth.* (1977-1986) (caged rollar) OEM 35067-77 & OEM 35067-84* Replacement 4th gears are made with wider drive slots and steeper lead-in ramps for more positive 3-4 shifting. * The in.Oin. ring groove is a design update for all chain drive 4th gears from 1977 through 1986.
-
$441.00
Features & Benefits:-* A great bolt in cam for stock EV80 engines using state of the art design. Very strong, broad torque band which will pull hard from 2000 to 5500 RPM.* EV27 cams run great with fuel injectors or carburetors!* Works with stock valve springsSuggested Additional Purchase:Adjustable Pushrod Kit: # SS930-0052 or # AP-292245Lifters:…
-
$441.00
Features & Benefits:-* Mild bolt-in street cam with more torque and HP for all around riding with stock comp ratio. Similar to stock L cam but more output. Pulls from 1800-5200 RPM.* EV23 cams run great with fuel injectors or carburetors!* Works with stock valve springsSuggested Additional Purchase:Adjustable Pushrod Kit: # SS930-0052 or # AP-292245Lifters:…
-
$440.00
* Mild street: Pans and Shovels, smooth idle, more power through RPM range. Bolts in with no head work. OK for stock heads.* If you are installing cams in a shovel engine, the Andrews valve spring collars and related parts will make things go a lot smoother. The Andrews springs and collars are designed for…
-
$440.00
* Hydraulic version of a #B# cam. Usually a bolt-in but spring spacing required on stock 1980-1981 Shovel Heads.* If you are installing cams in a shovel engine, the Andrews valve spring collars and related parts will make things go a lot smoother. The Andrews springs and collars are designed for easy installation and maximum…
-
$440.00
Features & Benefits:-* You’ll get more mid-range and top-end power for your street or drag bike* These cams work with solid or hydraulic lifters, and the idle remains unaffected up to 6,000 rpm with stock valve springs.* AB GRIND CAMS have an A intake plus a long duration exhaust for cooler running and high-end power
Showing 1–16 of 114 results